Vcds Interface Not Found

/ Comments off

Interface

This article will guide you how to install VAG-COM USB cable on Windows and VCDS software. (This article also applies to later versions of VCDS software)

CAUTION:

There's several versions of VAG-COM sold online. Unfortunately 99% of them are using low-grade hardware chip with additional of cracked VCDS software (sometimes needed an awkward computer date adjustment). If you own this kind of version, know half of it's functions don't work. For that reason we recommend you get the high-quality VAG-COM 2021 cable with original, unlocked and full version of VCDS software from Ross-Tech™ — by clicking here.

STEP 1: Install Ross-Tech VCDS Software

Vcds interface not found windows 10

DO NOT plug VAG-COM cable into computer yet.

You need to go to wire manufacturer and get the Win 7 drivers for his wire. XP and Vista drivers will not work with Win 7. You said it has a blue light on it. That is not a Ross-Tech HEX or KEY style dongle interface. I don't know what you have but it is not a genuine Ross-Tech dongle interface. (Better not Use Win10, Pls choose install 32-bit EXE on 64-bit System), otherwise will meet problem of vcds interface not found) OBD2Store.com– China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Uninstall any other VCDS versions, if present on computer. Then delete c:Ross-Tech folder.

Install VCDS software. (Leave original installation path)

When install is complete, do not launch VCDS.

Exit the Installer.

STEP 2: Plug VAG-COM Cable Into Computer

Plug VAGCOM cable into any USB port.

Windows will install drivers automatically.


If driver install fails, skip to Troubleshooting.

STEP 3: Disable Internet & Launch VCDS Software

Golden Rule: Must disconnect from internet everytime before launching VCDS, else will say 'Interface not found'. Also, do NOT update the software.

Read golden rule above?If yes, then...

Launch VCDS software from Start Menu. Or from C:Ross-TechVCDSVCDS.exe

Go to: Options » Test (leave it as USB)

It should show 'Port Status: OK':

Click 'Save'.

You're now ready to safely scan your car!

STEP 4: Disable Update Nag on Startup

Start > Startup > Right-click 'RT-Updater' > Delete

Troubleshooting:

You are here because when you inserted VAG-COM cable for first time, Windows failed to install drivers properly.

Expand:

SOLUTION 1:

Leave cable connected to computer. Restart computer. It should be fixed now. Go to Step 3.

SOLUTION 2:

VAGCOM cable should be connected to computer.

1) Go to Control Panel.

  • Windows Vista/7/8/10: Control Panel » System » Device Manager
  • Windows XP: Control Panel » System » 'Hardware' tab » Device Manager
Vcds lite interface not found

2) Expand 'Ports (COM & LPT)' or 'Universal Serial Bus Controllers'.

You're looking for a device that has name 'Ross-Tech' in it. It will have a yellow mark next to it like this:

Here's an example: OR it may show as 'Ross-Tech Direct USB Interface'.

Vcds interface not found fix

3) Right-click on this device with the yellow mark » Update Driver Software.

4) Choose 'Browse Computer for Driver Software'.

5) Browse to: 'C:Ross-TechVCDS'. It should look like this:

6) Click 'Next'. When you get below message, choose 'Install this driver software anyway'.

When driver installation is complete, disconnect cable from computer. Restart computer.

When you're back in Windows, you may connect cable into computer, and go to Step 3.

SOLUTION 3 :

If after SOLUTION 2, cable is still showing a Yellow mark (), then you're likely on Windows 8, 8.1, 10 or above.

In this case, disconnect cable.

And disable driver signature enforcement. Here's how: Windows 8/8.1|Windows 10

When done, go to Step 3.

Notes:

  • DO NOT update the software to latest version, else it will not work. Only works on current version.
  • If you bought your VAG-COM cable from us, then registration is not needed. It's already registered/licensed.

VAG COM 12.12 Interface Not Found Problem Solution Share From ebdtool.com

Problem may caused by:

VAG COM 12.12 interface vcds 12.12 software connect to internet after installation, and caused driver updated

Solution:

Uninstall all related software, and download the software below. And reinstall the software

Vcds interface not found windows 10

Software Download Link

https://mega.nz/#!tJlXjLra!RJq9ND8Bi4wlMcn8orLSUNVn_TaxV4F-U-lZP68APT8

Attention:

1.Computer time into 2013.10.1 (each software prompts to change the system time expired are to this time), turn off all network connections.

Port Status Ok Interface Not Found Vcds

2.Please never connect it to Internet and update the software.

Vcds Windows 10

3.To avoid loss and damage of software data,please dont pull up and plug USB and OBD port during the use(open the software and communications within car).

4.Please make sure all the antivirus programs are closed before using,it is very important. Drivers path: C:Ross-TechVCDS If need password, the password is xxxROSSTECH

Vcds Ross Tech Interface Not Found

Cable Status Screencut

Vcds Interface Not Found Fix

1.Cable connect to computer but not power on

2.Cable connect to computer and power on

Vcds Interface Not Found

3.Cable connect to computer and connect with car

More question about VAG COM 12.12, just keep your order number contact with Skype: eobdtool02